XENTRY Update Service and Retail Data Storage
XENTRY Update Service Introduction and Operating Concept
The XENTRY Update Service provides your workshop online with ECU software and flash software as well as release updates for diagnostic systems. Release updates and ECU software  of the old âRegio DVDâ and âDigital Operatorâs Manualsâ are provided online and centrally by the Mercedes Benz AG. There are two options available:
XENTRY Update Service with Retail Data Storage device (recommended)
XENTRY Update Service without Retail Data Storage device
Due to constantly growing data volumes as a result of further developments in control units for future vehicle model series, the storage requirements for retail data storage are increasing continuously. Therefore, fast download time and redistribution are essential.
The new Retail Data Storage 2 has a powerful 18-terabyte hard drive. Thanks to the two times higher data transfer speed compared to the predecessor model, the growing data volumes can be handled without any problems.
Technical specification of the Retail Data Storage 2:
|
Less effort for your updates
Ensure regular updates for all your XENTRY diagnostic devices with the XENTRY Update Service. Depending on the configuration, new release updates and add-ons are automatically downloaded from the Internet to your Retail Data Storage (network storage) within 48 hours of publication and immediately distributed from there to your XENTRY diagnostic devices - without effort, fully automatically and with low downtimes of your diagnostic devices. Download and installation of release updates are carried out in the background â you reduce the time required for update to about five minutes per device and thus increase the efficiency in your workshop.
Work even more efficient in your workshop
You can define the download times of the XENTRY Update Service individually so that updates and software are only downloaded at night outside of workshop operation, for example. This reduces waiting times when using the diagnostic systems.
If you use several diagnostic systems, the same software and updates do not have to be downloaded several times from each diagnostic system individually, but only once to the Retail Data Storage, which then supplies the various networked diagnostic systems.
XENTRY Update Service without Retail Data Storage
The XENTRY Update Service can also be used without Retail Data Storage, but it has some disadvantages:
Multiple download of data required, as each diagnostic device must download it separately
High download volume from the Internet
Longer waiting times in workshop operation, depending on download duration
We therefore only recommend the "XENTRY Update Service without Retail Data Storage" variant if you use 1-2 diagnostic systems per operation and use them only irregularly.
Initial startup and training
Learn how to commission and use the XENTRY Update Service and Retail Data Storage.
Technical requirement
| Internet connection: An Internet connection with at least 100 Mbit/s (lower bandwidths may result in longer download times) and a maximum latency of 60 ms. Activation Domains and Ports: The Retail Data Storage must be able to reach the following domains and ports on the Internet: Domains: *.mercedes-benz.com *.corpinter.net *.tbinter.net *.akamaihd.net Ports: 80 (http) 443 (https) If you use a XENTRY Diagnosis Kit: The XENTRY Diagnosis Pad | Pad 2 systems must be able to reach the following connections to the Retail Data Storage: Ports: 80 (http) 443 (https) 9000 (http) 7001 (tcp) 7002 (tcp) Any proxy server used must support the HTTP version 1.1 (range requests). In the firewall, the domains and ports must be enabled for XENTRY Portal, XENTRY Diagnosis Pad and Retail Data Storage. If not all domains are enabled, support can only be provided to a limited extent or not at all, because support packages cannot be transmitted for example. Furthermore, breaking SSL connections is not allowed. As a result, online services including the XENTRY Update Service, cannot be used. Hint: The activation on IP addresses or IP ranges is not recommended due to the use of content delivery networks! |
The purchase of the Retail Data Storage 2 already includes the XENTRY Update Service for 42 months from the activation date. The customer who has completed the purchase of the Retail Data Storage will receive an e-mail notification before the 42 months expire about the end of the 42 months. If the customer wishes to continue using the data supply via the XENTRY Update Service in combination with an Retail Data Storage, he has the option of either purchasing an extension of the XENTRY Update Service for 12 months, or purchasing a new Retail Data Storage. The activation date can be read out within the XENTRY Update Service Control Center (Retail Data Storage), both in the Monitoring area and in the Administration area, here in the tab "About the Device".
Disposal
Because the Retail Data Storage is a purchased product, you do not need to return it at the end of its use. From Mercedes-Benz there are no specifications and requirements for the disposal of a Retail Data Storage. Please dispose your old Retail Data Storage in accordance with the legal requirements in your country.
Control unit programming with the USB to LAN Adapter
The size of the control unit software increases with new vehicle models. Workshops therefore need longer to transfer control unit software via OBD to the vehicle. The data transfer rate via OBD is limited to 100 Mbit/s. Control unit software can now optionally be transferred to the vehicle via USB to LAN Adapter at 300 Mbit/s.
General information / application
As from XENTRY Diagnosis release 12/2023, it is recommended to transfer the control unit software to the vehicle via USB to LAN Adapter when performing control unit programming of the head unit BR214 and BR236. Transfer via OBD is also still available. However, transfer using both options at the same time is not possible â you have to choose one of the two transfer options.
The diagram below shows what the control unit programming path via OBD and via USB to LAN Adapter looks like.
When performing programming via OBD (left side in the diagram), control of the programming as well as transfer of the control unit software takes place via the XENTRY Diagnosis device, the VCI, and OBD.
When programming via the USB to LAN Adapter (right side of the diagram), control of the programming is still performed via the XENTRY Diagnosis Device, the VCI, and OBD, while the control unit software is transferred from the Retail Data Storage directly to the vehicle control unit via the LAN port of the workshop network at the diagnosis workstation, a LAN cable, a USB to LAN Adapter, and the USB-C port in the center console of the vehicle.
Programming via the USB to LAN Adapter offers the following advantages:
The USB to LAN Adapter enables 3x faster data transfer (300 Mbit/s instead of 100 Mbit/s), which shortens waiting times during control unit programming. An example scenario can be found here.
Very stable connection as data transfer from Retail Data Storage to the vehicle via the USB to LAN Adapter is completely cabled.
Requirements
The workshop network must meet several requirements to be able to use the USB to LAN Adapter and achieve the full data transfer rate of 300 Mbit/s:
A Retail Data Storage that is located in the same network as the USB to LAN adapter, LAN port and the XENTRY diagnostic device.
The USB to LAN adapter and the Retail Data Storage should preferably be located in the same subnet (Class-C subnet). When using different subnets, there may be restrictions in the use of the USB to LAN adapter with older head unit software. Then follow the instructions in XENTRY Diagnosis.
A LAN cable with at least Cat5e, i.e. 1 Gbit/s and 100 MHz
(Cat5 (10/100 Mbit/s and 100 MHz) is not sufficient).A device with up-to-date XENTRY Diagnosis Software installed.
A compatible VCI with up-to-date firmware.
Compatible model series: 214 (E-Class) and 236 (CLE-Class). Additional model series will follow later.
Compatible control unit: Head unit (in XENTRY Diagnosis: A26/17 - MBUX multimedia system + instrument cluster)
Connection of the diagnostic device with the vehicle via VCI and OBD as a diagnostic device connected with OBD is still required for control of the programming.
Delivery package for USB to LAN Adapter
Please contact your country representative to order the USB to LAN Adapter. The USB to LAN Adapter and a 10 m Cat5e LAN cable are part of the delivery package.
Helpful documents
You can find instructions for commissioning and use of the USB to LAN Adapter in the following documents:
XENTRY Update Service and Retail Data Storage Support
You can select the appropriate category under âNeed help?â. If you cannot find a suitable answer in the FAQs, open a ticket at the bottom of the page.
